For developers · 20 cities · 8 min read
20 U.S. Cities Where Murals Add Value for Real Estate Developers
A city-by-city look at where a painted wall fits a development best, from Atlanta and Chicago to Austin, Denver and Portland.
Murals for real estate developers work in almost every city, but each city asks for something different. Here are twenty U.S. cities where we see the strongest fit between a painted wall and a development, with what to think about in each. Where we have a full city guide, we link it. Every city also has a page with muralists and walls to look at.
Why a mural belongs in a development plan
A mural is one of the few amenities that is also marketing. It gives a building a face people remember, a backdrop for photos, and a reason for tenants and neighbors to feel good about the address. It needs no power, no daily upkeep and no sign permit in many cases, though local rules vary and are worth checking early.
Developers also care about risk. A commissioned wall should come with a clear price, a written agreement, a mockup you approve before paint goes up, and one person coordinating the artist. That is the part we handle.
1. Atlanta: Beltline blocks, parking decks and a growing mixed-use skyline
Picture a leasing tour that starts at the trail. Along the Beltline in Old Fourth Ward and on the Westside, people arrive on foot and on bikes, so the walls that matter face the path, not the parking lot. Midtown and the Westside also keep adding mixed-use blocks and structured parking, and a blank concrete deck is often the biggest unused surface on the site.
Georgia summers are humid and the afternoon storms are real, so walls need a dry, sound surface before anyone picks up a roller. Planning tip: walk the site at the hour most people will see it, then choose the face that gets that traffic. Decks and retail edges usually reward the trail side over the street side. Leasing teams can then point to the wall in tours, because it is something prospects can see before they step inside.
Read the Atlanta developer guide · See Atlanta muralists and walls
2. Chicago: Brick, winters and block-by-block identity
Few cities punish an exterior wall the way Chicago does. Lake wind, deep freezes and fast thaws crack coatings that were never meant for them, so the first question is what the brick has been through, not what the image should be.
The good news is how many tall, plain side walls the city has. Neighborhoods such as the West Loop, Logan Square and Pilsen each have their own character, and a mural that reads as part of that neighborhood tends to be welcomed by the people who live beside it.
Planning tip: book the painting for the warm months and have the masonry inspected and repointed beforehand. Paint over loose mortar will not last a single winter. Ask the painter how the wall will be washed, primed and sealed, and expect a clear answer before any deposit moves.
Read the Chicago developer guide · See Chicago muralists and walls
3. Seattle: Gray-day color and a strong maker culture
Why does color matter so much in Seattle? Because for long stretches of the year the sky is the same shade as the sidewalk. A bright wall in South Lake Union, Capitol Hill or Ballard changes how a block feels in November, which is exactly when residents decide whether they like where they live.
Moisture drives the practical side. Paint needs a dry window to cure, and walls shaded by neighboring buildings stay damp longer than they look.
Tenants here also tend to notice craft and distrust anything that feels corporate. Original work with a hand-made quality fits better than a scaled-up stock graphic.
A useful step: schedule a buffer for weather, and ask early whether the wall dries out between rain spells. Neighbors in tight urban blocks will thank you for a heads-up about scaffolding and noise.
Read the Seattle developer guide · See Seattle muralists and walls
4. Los Angeles: Big walls, big light and a mural tradition
Nobody in Los Angeles is surprised by a mural, so a forgettable one gets ignored. People here have seen enormous work in the Arts District, Venice, Boyle Heights and Downtown, and they judge new walls against it.
Many buildings are stucco or textured block, which drinks paint and changes how fine detail reads. Strong, simple shapes tend to carry better than delicate ones, particularly when most viewers pass by in a car or on a scooter.
Sun is the other constant. Intense light fades weak pigments, so ask what materials are going on the wall and how they handle UV.
One planning habit worth keeping: look at the proposed wall from the street at the speed people actually travel it, before approving a mockup. Parking and lift access in dense blocks can also shape the schedule, so raise those details at the start.
Read the Los Angeles developer guide · See Los Angeles muralists and walls
5. Charlotte: Fast-growing districts that need a face
Charlotte builds quickly, and a lot of what goes up in South End, Uptown and the newer corridors shares the same glass, stucco and metal palette. When every project looks related, the one with a distinctive wall gets remembered.
The Rail Trail through South End and the greenways draw people on foot, which makes trail-facing walls a natural fit. NoDa shows how far an arts identity can carry a neighborhood, and newer districts can borrow that instinct.
Summers are hot and thunderstorms arrive fast, so crews work around the weather rather than against it.
Planning tip: decide early who owns the story of the wall, whether that is the property name, the neighborhood or a tenant. A mural that tries to carry all three usually says none of them clearly. Get that decision made first and the design conversation gets much shorter.
Read the Charlotte developer guide · See Charlotte muralists and walls
Not sure which of these fits your project? Send us a photo of the wall and we will point you to the right artist and size tier.
6. Phoenix: Desert light, shade and walls that last
Start with the sun, because in Phoenix it decides everything. Surface temperatures on a west-facing wall can make paint dry before it bonds, so experienced crews often work early, follow the shade around the building, and pick coatings made for heat and UV.
Block walls and stucco are common, and both need cleaning and sealing first. Dust is part of life here, and a wall that skipped prep will show it.
Roosevelt Row downtown has shown how well bold painted walls suit the desert palette, and the monsoon season adds a few weeks of unpredictable skies that are worth leaving room for in the calendar.
Developers get the most from placing work where shade and foot traffic meet, such as patios and courtyard edges. Ask how the crew plans to handle the hottest hours, since that tells you a great deal about their experience.
Read the Phoenix developer guide · See Phoenix muralists and walls
7. Philadelphia: A city that already treats walls as art
Philadelphia residents grew up with painted walls on their blocks, and many have opinions about them. That makes the city generous toward new work and also quick to notice when a mural ignores its surroundings.
Rowhouse neighborhoods leave tall blank gable ends visible from long distances, and former industrial buildings in Fishtown, Northern Liberties and along the river offer larger canvases of brick and concrete.
Start by talking with neighbors and local groups before the design is final. A wall that reflects people actually living there is easier to defend and to enjoy, and community goodwill is worth more than any leasing brochure.
Winters here are cold and wet, so plan exterior painting for spring or fall when masonry is dry. Property managers who do this tend to find the wall becomes a point of neighborhood pride rather than a point of friction.
Read the Philadelphia developer guide · See Philadelphia muralists and walls
8. Miami: Color, heat and salt air
In Miami, the weather is a design brief. Salt air eats at coatings, humidity slows curing, and a hurricane season sets the outer limit of the painting calendar. A wall near the water faces tougher conditions than one a few blocks inland.
Wynwood made the city's reputation for outdoor color, and the Design District and Brickell have their own, more polished tastes. A wall in each place speaks to a different audience, so the style should be chosen for the block rather than copied from the neighborhood next door.
Tenants and visitors expect bold, photographable work, and many will share it online within minutes of seeing it.
Planning tip: pick the paint system for exposure first, then the palette. Fading is the most common regret here. It is far easier to choose a restrained palette that survives than a loud one that dulls in two summers.
Read the Miami developer guide · See Miami muralists and walls
9. Cincinnati: Historic brick and a neighborhood-by-neighborhood revival
Walk through Over-the-Rhine and you see what renovation can do: old brick streets, restored facades and a steady stream of new restaurants and apartments. Cincinnati rewards projects that respect that fabric.
A mural on a historic masonry wall needs a lighter touch than one on new concrete. Soft, aged brick can be damaged by the wrong paint, so ask for breathable products and a repair plan before any color is chosen.
The city is also full of hills, which means some walls are seen from above or from across a valley. That can change how large a design should be and where the strongest focal point belongs.
Neighboring owners and local preservation groups often care about these blocks. Talking to them early saves schedule trouble later. A short site visit with the owner of the wall and the person who will paint it usually answers most of these questions.
Read the Cincinnati developer guide · See Cincinnati muralists and walls
10. Nashville: Music city, hotels and a photo-ready street scene
A hotel guest in Nashville is probably holding a phone before checking in. That changes what a wall is for: it is a backdrop, and the best ones are designed with the camera in mind, with clear space for people to stand and good light at the hours they will visit.
The Gulch, Germantown, East Nashville and the downtown core each have a different crowd, from bachelorette weekends to locals out for dinner. A restaurant patio wall can lean playful, while a hotel lobby may want something quieter and more crafted.
Music is the obvious theme and also the most overused. Consider something drawn from the property's own story so it does not look like the dozen walls next door. Check where the sun lands in the late afternoon, because that is when most photographs get taken.
Read the Nashville developer guide · See Nashville muralists and walls
Not sure which of these fits your project? Send us a photo of the wall and we will point you to the right artist and size tier.
11. Dallas: Large-scale buildings and destination districts
Dallas thinks big, and its buildings follow. Plazas, towers and long retail frontages leave wall surfaces of real size, so a mural often needs a single clear focal image rather than many small ideas. Deep Ellum has long welcomed street-level art, the Design District has a trade-showroom polish, and Bishop Arts in Oak Cliff sits at human scale.
Heat is the practical limit. Long summers mean painting windows in spring and fall are precious, and high lifts or scaffolding need to be booked well ahead.
One tip for a large project: ask for a mockup viewed from the distance people will actually stand. A design that works up close can dissolve across a plaza.
Clear sightlines from valet, patio and sidewalk usually decide the wall. Walk the approach with your team before approving anything, and photograph it from the spots where guests arrive.
Read the Dallas developer guide · See Dallas muralists and walls
12. Houston: Wide-open walls in a spread-out city
Houston is a city you drive through, and the walls that work are the ones you can read from the car. EaDo, Montrose, the Heights and the Museum District each give different crowds, but they share a habit of seeing the city in motion.
That favors bold shapes, strong contrast and a short message over a dense scene.
The climate is the harder part. Sticky heat, sudden downpours and the occasional storm system mean the schedule needs slack, and a surface left wet will undo a day of work. Coatings should be chosen for humidity and for long, bright afternoons.
There is also plenty of open wall in this city, so a developer can be picky. Choose the face with the most unobstructed approach, even if it is not the largest one. Send us a photo from the road as well as one from the wall, and we can judge how it reads at speed.
Read the Houston developer guide · See Houston muralists and walls
13. Austin: A creative-economy brand that rewards the handmade
Austin people like a place with a point of view, and they can smell a chain from a block away. That is useful for a new building trying to feel local.
East Austin, South Congress, Rainey Street and the downtown towers each have their own mood. A tech company's amenity floor may want art that sparks conversation, while a South Congress storefront wants something that works with its existing signs and crowds.
Texas sun and sudden heavy rain are both routine, so check the wall for drainage and old paint before design starts.
Planning tip: think about what happens in a year. Austin changes fast, and a wall beside a future construction site may get blocked. Ask what is planned next door before you commit. A short call about neighboring plans is cheap, and it protects an investment you want people to see for years.
Read the Austin developer guide · See Austin muralists and walls
14. Denver: Warehouse districts, high-altitude sun and craft
At a mile above sea level the sun is stronger than most people expect, and paint feels it. Pigments that hold up in a coastal city can fade quickly in Denver, so ask about lightfastness and clear protective coats.
RiNo and LoDo are full of converted warehouses, brick facades and old rail-side buildings, and murals suit adaptive reuse especially well. A painted wall can echo the industrial past while making clear that the building has a new life.
Weather swings are sharp: warm afternoons, cold nights, spring snow and fast-moving storms. Crews often need flexible dates.
The state's dry air helps paint set quickly, which is good for schedules but demands steady, confident hands on the wall. If the wall is brick, ask whether it has been painted before, since old layers affect how new paint sticks.
Read the Denver developer guide · See Denver muralists and walls
15. San Francisco: A deep mural heritage and design-literate tenants
San Francisco has a mural history that people here take personally. The Mission District, with its alleys full of painted walls, set a standard that locals still measure new work against.
Developers should expect a knowledgeable audience and a more involved approval path than most cities. Historic districts, neighborhood groups and city review can all shape what goes on a wall, so start the conversation before design time is spent.
Fog and wind are part of the picture, and many walls stay damp and cool through the summer. Paint and schedule should be chosen for that, not for a sunny photo.
The best fit is a wall that acknowledges the city's tradition and still brings something new. Copying the past comes across as hollow, and ignoring it can feel careless. Developers who bring neighbors into the process early usually get a smoother review and a warmer welcome.
See San Francisco muralists and walls
Not sure which of these fits your project? Send us a photo of the wall and we will point you to the right artist and size tier.
16. Boston: Historic streets and a university-driven creative scene
In Boston, the question is often what the building is allowed to be before anyone asks what it should look like. Historic commissions and neighborhood review boards matter in many districts, so checking early whether a wall can be painted at all is the sensible first move.
The mix is useful, though. Fenway, the Seaport, Allston and the South End attract students, researchers and young professionals who care about art, and newer blocks have blank walls that older ones never offered.
Brick is the common material, and it behaves differently depending on age. Cold winters and wet springs narrow the painting window to warmer months.
A mural that gives people a reason to linger on the sidewalk is a real asset on a street built before cars. Send us the address and a photo, and we can help you think through what to ask the city before design begins.
See Boston muralists and walls
17. New York: Visibility on a block where everything competes
Anything you build in New York is competing with a hundred other things for a glance. A mural on a side wall that rises above its neighbors can be the one thing visible from blocks away, particularly in Brooklyn and Queens neighborhoods like Williamsburg, Bushwick and Long Island City.
Access is where projects get complicated. Lifts, sidewalk sheds, street closures and building rules affect timeline and cost, so a quote that does not account for access is not a real one.
Landmark and historic district rules can apply in parts of the city, and commercial signage rules may be triggered if a mural looks like advertising. Ask about both early.
For a ground-floor tenant, a recognizable backdrop outside the door often matters more than anything in the window. Build that access into the plan from the start so the final price matches the work on site.
See New York muralists and walls
18. Portland: A city that values handmade and local
Portland is skeptical of anything that feels mass-produced, and that is the opportunity. The Pearl District, the Central Eastside and the neighborhoods along Mississippi and Alberta all reward work with a human fingerprint on it.
Rain is the practical story. Long wet seasons mean exteriors are best painted in the dry months, and walls in shade can grow moss or hold moisture long after a storm.
Mixed-use and hospitality projects here tend to benefit from art that was clearly made for that place, with a local touch in subject or style rather than a generic trend.
Before you start: ask who else cares about the wall. Neighborhood associations are active in Portland, and a short conversation can turn a possible objection into an ally. A wall that fits the neighborhood will keep fans longer than one that merely follows a trend.
See Portland muralists and walls
19. Detroit: Revival blocks and large industrial walls
Detroit's buildings were built big, and a good number of them still have vast brick and concrete walls with nothing on them. Eastern Market, Midtown, Corktown and downtown each show signs of reinvestment, and a painted wall is one of the quickest ways to announce that a reactivated building is open.
Surfaces can be rough and older, and some have decades of grime or peeling coatings. Budget time for cleaning and repair, because that stage is often the difference between a mural that lasts and one that flakes.
Winters are hard, so exterior work belongs in warmer months.
The city has a strong sense of ownership about its stories. Work that comes from people with real ties to the area tends to be received more warmly than a design imported from elsewhere. Share the wall condition with us up front and we can match it with a muralist who has handled similar surfaces.
See Detroit muralists and walls
20. Minneapolis: Long winters and a strong arts community
When winter lasts this long, color is a kindness. Minneapolis has a serious arts community, and the North Loop, Northeast arts district and Uptown all show how much residents value it.
Cold is the technical challenge. Many paints will not cure below certain temperatures, and freeze-thaw cycles punish poor adhesion, so exterior painting is a short summer-and-early-fall job.
Interior work is a strong answer to the same season. Lobbies, skyway-adjacent spaces and amenity rooms are places where people spend most of the year, and a wall there gets seen far more often than one outside.
Alley walls are an underused option in this city, because many sit along routes that people already walk or bike and get little other attention. Think about the full year of use when choosing between an outside wall and an indoor one.
See Minneapolis muralists and walls
What a mural costs a developer
Price depends mostly on wall size, surface and access. We group walls into four size tiers so you can budget before you ask. See the size tiers for the ranges, and how it works for the deposit, mockup and payment steps. For design firms and architects, our referral program pays the firm on closed jobs.
How to hire a muralist in any of these cities
- Send us the wall. Share a photo, rough size and city through our quote form.
- Tell us the goal. Lobby, restaurant, hotel corridor, parking deck or exterior side wall? Mention surface, access and tenant needs.
- Get one written quote. You receive a fixed, all-in price, not a range of hourly guesses.
- Approve a mockup. You see the design on your wall before you commit.
- We coordinate the rest. Contracts, scheduling and the painting itself, with one point of contact.
Questions developers ask about murals
Which city should I start with if I am developing in several?
Start where your next project is, then reuse what you learn. Each city above has its own guide or page, and we can quote walls in different cities from the same request. Tell us the cities and we will group the work.
Do murals help leasing or property value?
A mural will not guarantee results, and the effect is hard to isolate. What it can do is give a building a distinctive identity that tenants, visitors and neighbors remember and share, which supports the story your property already tells.
Who handles contracts, scheduling and the artist?
We do. MuralScout is your single point of contact for the quote, the agreement and the schedule, so your team is not coordinating with an artist alone. You approve a mockup before you commit.
Can I commission murals for more than one property?
Yes. Many developers and property managers have several walls. Send us the list with photos and cities, and we will match each wall with a vetted muralist and quote them together or one at a time.
Do I need a permit or the wall owner’s approval?
Often the wall owner’s written approval is required, and some cities or districts have review steps. Check local rules before design starts. We help you plan around them, but we are not a substitute for legal advice.
Have a wall in one of these cities? Start with a photo
Send us a photo of the wall and a few lines about what you want it to do. We will match it with a vetted muralist and take it from there.